Jcloud's soil auto indoor grow # 1 - 2018

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
Here's a update wood glued the exhaust and intake vents to port holes. Letting it dry for about two days to fully dry. I didn't want to run two holes from same window, but it was my only option. Because I didn't want my central air and heat being sucked outside my window. Having the air exhaust from the room. So it took me longer to get all the material. But after I install this exhaust an intake everything should be good to go. I can start running my ducting and set up my grow finally took forever. I hope rain can't get past the vents

2018-11-11 16.05.47.jpg2018-11-11 16.06.16.jpg2018-11-11 16.07.48.jpg2018-11-11 16.08.33.jpg
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
The day is finally here!!! Got to figure out something for all these wires. But it's finished an just got to set the timer. An im all set to go. Tomorrow I'll start popping some seeds. Bad news we got a freeze coming supposed to get 20 degrees Wednesday and Thursday morning.

2018-11-12 15.09.24.jpg
2018-11-12 16.14.25.jpg
2018-11-12 16.34.34.jpg
IMG_20181112_200151_869.jpg
IMG_20181112_200151_870.jpg
 
Last edited:

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
@CrimemasterGoGo thanks buddy Yeah, noo lol. Trying to make up my mind so many possibilities an possible crosses. I was thinking little stilton, Crystal dwarf, russian fuel and short stuff automatic # 1. But idk for sure because I love all these kinds I will be popping something by this week so any suggestions are welcome. I'll consider every opinion
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
Day 1 Germination day 6:30 pm Tuesday November 13th. Got a huge variety of nutrients to pick from. I ordered a microscope to check out tricomes. An check for pest. Along with a petri dish to keep the bugs from escaping. An get a good view. I grabbed some twist ties for LST training. Im going to do the tie down method to spread the branches out. O.k. so I decided to pop some seeds tonight was going to wait for the freeze to pass but our central heat is keeping my room pretty stable 66 degrees F to 73 degrees Fahrenheit . For the line up running Russian fuel, Crystal dwarf, Short stuff automatic # 1, and ruderalis indica. So that's what I plan on chucking pollen with hoping for 3 females and one male. But well see what happens
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
@Sunshine thanks dear friend just checked on them. Resoaked the towels with warm water. Placed back on heat mat. The ruderalis indica has a crack no tap root. Short stuff automatic # 1 hasn't cracked but it's a gorgeous fat seed. None haven't turned black but I have see the shells splitting. Temps are 77F- 66F
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
I got a Russian fuel to pop a root. But on the very tip is a black dot. Idk what it is the root is very white an happy. The rest no tap roots as of now. But there staying warm hoping by tomorrow the remaining three pop. I got my four pots ready when the seeds shed there helmets. I popped extra holes for good aeration on bottom and around the side to tie down Lst train.


20181114_222453.jpg
 
Last edited:

Sunshine

Organic Fanatic
Aug 7, 2017
3,814
7,150
I love the sound of the Russian Fuel, I hope she turns out to be a girl ??
Peach and strawberry both make an appearance in Russian Fuel Auto, with the subtle smell of fuel creeping through unannounced.
Medical marijuana patients needn't worry about their medicine tasting bittersweet, because this feisty female is all sweet. In effect, she induces a highly relaxing body stone that also supports positive mental energy and creative thinking. With that in mind (quite literally), Russian Fuel Auto prevails as an effective medical strain, combating ailments such as stress, depression, anxiety and fatigue.
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
@Sunshine oh crap it would have been a great candidate to breed with with dr. Feel good and blue Himalaya both medical also. I didn't realize oh well still would make a nice cross breed. It sounds like a great flavor strain. I forgot about the description haha
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
I know I showed my tent before but I want to give y'all a good view of how my ducting is running to the window. I got my tent up off the ground, because I got carpet to get away from bugs getting in easy. think the Russian fuel wants to rot on me tried wetting the black stuff off damn. It must have took a shock the central heat started screwing up in middle of night but I run a heater. During last nights freeze temps got low but my heat matt gets pretty hot to combat the cold.

20181115_094757.jpg20181115_095337.jpg20181115_095407.jpg20181115_095402.jpg20181115_095913.jpg20181115_095737.jpg20181115_095027.jpg20181115_095011.jpg20181115_094930.jpg
 

Sunshine

Organic Fanatic
Aug 7, 2017
3,814
7,150
Looking great @Jcloud777! The vents could possibly be made slightly more camouflaged if you could spray/paint the wood matt black so the circles are even less apparent ;)
The tent looks nice and tidy, only thing I'd change is to get the power strip and filter off the floor. You can make an easy sling for the can and fan with velcro roll, cut a few peices the same length and loop them, bungees also work well. The last tent I bought came with a premade holder for the filter and fan with adjustable velcro fastenings.
I like your jars btw, you can't beat the ball ones ?
 

420StonerDad

Well-Known Member
Oct 22, 2018
351
843
Looking great @Jcloud777! The vents could possibly be made slightly more camouflaged if you could spray/paint the wood matt black so the circles are even less apparent ;)
The tent looks nice and tidy, only thing I'd change is to get the power strip and filter off the floor. You can make an easy sling for the can and fan with velcro roll, cut a few peices the same length and loop them, bungees also work well. The last tent I bought came with a premade holder for the filter and fan with adjustable velcro fastenings.
I like your jars btw, you can't beat the ball ones ?

Nice work. @Jcloud777 , If you look at my build post you can see my filters hanging, i think that is what @Sunshine is talking about.
 

Jcloud777

Well-Known Member
Jul 29, 2018
205
395
Looking great @Jcloud777! The vents could possibly be made slightly more camouflaged if you could spray/paint the wood matt black so the circles are even less apparent ;)
The tent looks nice and tidy, only thing I'd change is to get the power strip and filter off the floor. You can make an easy sling for the can and fan with velcro roll, cut a few peices the same length and loop them, bungees also work well. The last tent I bought came with a premade holder for the filter and fan with adjustable velcro fastenings.
I like your jars btw, you can't beat the ball ones ?
Thanks buddy good idea I can spray paint it black. Im waiting on a new power strip the timers defective. Haven't been able to set timer. O.k. I'll try to get off the ground. When my new one comes in. hopefully it will reach to the cord. I got a carbon filter support with my tent. I want to hang my filter an fan up up very badly. But my old junky inline fan rattles very loud. Spent hours trying to to do. I'll try again when I get the replacement timer power strip. See what I can do. Oh yeah you like my jars got my plant food in there to keep it fresh. Im throw a little in the bottom of my pots. It's soluble fertilizer with biozome. Some organic bacteria stuff. im test it in the soil along with a little Azomite and dolomite lime. An if I get any mag diefencies. On my plants im foliar spray feed them.
 


Back
Top